Ignitor Frame

From: £1000.00

Low and long but still snappy, the Ignitor is a new breed of 4X bike; neither DJ nor trail bike, but somewhere in between.

More Information >

December 1st, 2018: Clearcoat is no longer available on BTR frames; please select a colour instead. We still use the same materials and workmanship under the coloured powder coat, but product images are for illustration only! More information >

Our 4X weapon, the Ignitor was developed from the ground up at races throughout the UK. Not having started with a DJ bike or a trail/enduro bike left us free to develop the ideal geometry and construction for 4X performance. The Ignitor will hold it’s own against the fastest bikes out of the gate, but offers grip and stability where others can’t.

  • 26″ wheels
  • Available in 4 sizes
  • Reynolds 853 and 631 front end, Dedacciai stays
  • 100mm fork travel
  • Approx. 2.35kg (Size M, all axles, fasteners etc)

BTR can supply any components you need with your frame, or even a complete bike!

Need to know anything else? Check the support pages, or Contact us and we’ll be happy to help!

Ignitor 2015 Geometry

 REACHSTACKSTEFF. TTBB DROPEFF. CSWBHASAHT LENGTHHEADSET STACKAXLE - CROWNOFFSET
IGNITORABCDEFGHIJKLM
S390581.14360576.95304001176.7566731301448040
M410581.14340587.67304001101.3666731301448040
L430581.14355607.67304001121.3666731301448040
XL450599.41370633.26304101159.4966731501448040

Internal Cable Routing
£60/cable

The cables are routed through thin stainless steel guide tubes, which run the full length of each internal portion. Rear brake and derailleur cables run internally through the down tube, then externally below the chain stays for the remaining distance. Stealth dropper post cable routing runs internally through the down tube, and directly into the base of the seat tube. The front ends of the cables are sealed to the stainless guide tubes, so that water and dirt cannot enter the frame.

Read more…

Integrated Seat Clamp
£20

An integrated seat clamp keeps the bike as simple and secure as possible, and complements a dropper seatpost nicely. The clamp requires a 5mm allen key to release and tighten.

More information

Custom Head Badge Text
£FOC

Custom head badge text allows you to add a line of text to the head tube badge on your frame. Add your own name, your preferred beverage, a short message about Strava or carbon fibre, or even your favourite film, to personalise your bike. Maximum of 11 characters; A-Z, 0-9.

Read more…

Chain Device Mount
£40

If you want to run a chain device, you need to have an ISCG05 mount. The mount can support a bash guard, or only an upper chain guide, or a full chain device with integrated bash.

More information

Bottle Cage Mounts
£20/pair

BTR bottle cage bosses are stainless steel, and ‘blind’ (no through-hole). This means that they not only work flawlessly as mounts, but also ensure that the frame isn’t compromised by their existence – even if you leave them open. Each pair (for one bottle cage) costs £20.

Bottle Cage Locations:

  • First cage – top side of down tube
  • Second cage – front side of seat tube
  • Third cage – underside of down tube

If you need to relocate a bottle cage, please contact us before placing your order.

Standard Frame Colours
£FOC

Standard frame colours are included in the price of a frame. Please refer to the Frame Colour Chart. Please note that the clearcoat (raw) frame finish is no longer available, as of December 1st 2018.

More Information

Special Frame Colours
£60+

Special frame colours may incur a surcharge above the £60 included, due to multi-coats and powder costs; this can be up to another £60 (£120 total). We’ll inform before commencing work on your order if there is any additional charge to be paid.

More Information

Custom Decal Colours
£30

Custom decal orders will receive a spare set of decals. Please refer to the Custom Decal Colour Chart.

More Information

  • 44mm head tube (requires external lower headset cup) More Information
  • 31.6mm seat tube (34.9mm clamp)
  • 142 x 12mm dropouts
  • 160mm post rear brake mount (Max. 185mm)
  • 73mm threaded (BSA) BB
  • Max. 36t chainring

The following size recommendations are a guideline only- contact us and we’ll be more than happy to discuss your needs!

Frame SizeMin. Rider HeightMax. Rider Height
Custom-156cm (5' 1.5")
XX Small152cm (5' 0")162cm (5' 4")
Extra Small158cm (5' 2")168cm (5' 6")
Small164cm (5' 4.5")174cm (5' 8.5")
Medium170cm (5' 7")180cm (5' 11")
Large176cm (5' 9.5")186cm (6' 1")
Extra Large182cm (5' 11.5")192cm (6' 3.5")
XX Large188cm (6' 2")198cm (6' 6")
Custom194cm (6' 4.5")-

Estimated lead time:

HARDTAIL28 Weeks

Check our current build queue

All BTR frames are supplied with every part needed to build your bike – just add your components to complete the build. If you need any spare parts, look no further:

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.