Belter Frame

Belter Frame

From: £1700.00

The Belter is our pure downhill hardtail frame. It’s the original long, low and slack hardtail, and it’s tough as nails.

More Information >

December 1st, 2018: Clearcoat is no longer available on BTR frames; please select a colour instead. We still use the same materials and workmanship under the coloured powder coat, but product images are for illustration only! More information >

The Belter is our pure downhill hardtail frame. It’s the original long, low and slack hardtail, and it’s tough as nails. We built it to be stable yet exciting and chuckable while providing a ton of grip. There’s no other hardtail which can match the Belter’s capabilities downhill, period.

  • Available for 26″ or 650B/27.5″ wheels
  • Available in 5 sizes
  • Reynolds 631 & 853 front end, Dedacciai stays
  • 150 – 160mm fork travel

 

Need to know anything else? Check our FAQ, or Contact us and we’ll be happy to help!

Belter 2015 Geometry

BELTER 26"REACH
(A)
STACK
(B)
ST
(C)
EFF. TT
(D)
BB DROP
(E)
EFF. CS
(F)
WB
(G)
HA
(H)
SA
(I)
HT LENGTH
(J)
HEADSET STACK
(K)
AXLE - CROWN
(L)
OFFSET
(M)
XS390628.85350558.5048.254051162.5661751301454240
S410628.85360578.548.254101187.5661751301454240
M430637.59380600.8448.254151217.4161751401454240
L450646.34400623.1948.254151242.2661751501454240
XL470646.34420643.1948.254201267.2661751501454240

BELTER 650B
REACH
(A)
STACK
(B)
ST
(C)
EFF. TT
(D)
BB DROP
(E)
EFF. CS
(F)
WB
(G)
HA
(H)
SA
(I)
HT LENGTH
(J)
HEADSET STACK
(K)
AXLE - CROWN
(L)
OFFSET
(M)
S410653.87360585.2060.54121191.9761.5751301455442
M430653.87380605.2060.54151214.9761.5751301455442
L450662.66400627.5660.54151239.7461.5751401455442
XL470671.45420649.9160.54201269.5161.5751501455442

[one_third padding=”10px 10px 10px 10px”]

Internal Cable Routing
£60/cable

The cables are routed through thin stainless steel guide tubes, which run the full length of each internal portion. Rear brake and derailleur cables run internally through the down tube, then externally below the chain stays for the remaining distance. Stealth dropper post cable routing runs internally through the down tube, and directly into the base of the seat tube. The front ends of the cables are sealed to the stainless guide tubes, so that water and dirt cannot enter the frame.

Read more…

[/one_third]

[one_third padding=”10px 10px 10px 10px”]

Integrated Seat Clamp
£20

An integrated seat clamp keeps the bike as simple and secure as possible, and complements a dropper seatpost nicely. The clamp requires a 5mm allen key to release and tighten.

More information

[/one_third]

[one_third_last padding=”10px 10px 10px 10px”]

Custom Head Badge Text
£FOC

Custom head badge text allows you to add a line of text to the head tube badge on your frame. Add your own name, your preferred beverage, a short message about Strava or carbon fibre, or even your favourite film, to personalise your bike. Maximum of 11 characters; A-Z, 0-9.

Read more…

[/one_third_last]

[one_half padding=”10px 10px 10px 10px”]

Chain Device Mount
£40

If you want to run a chain device, you need to have an ISCG05 mount. The mount can support a bash guard, or only an upper chain guide, or a full chain device with integrated bash.

More information

[/one_half]

[one_half_last padding=”10px 10px 10px 10px”]

Bottle Cage Mounts
£20/pair

BTR bottle cage bosses are stainless steel, and ‘blind’ (no through-hole). This means that they not only work flawlessly as mounts, but also ensure that the frame isn’t compromised by their existence – even if you leave them open. Each pair (for one bottle cage) costs £20.

Bottle Cage Locations:

  • First cage – top side of down tube
  • Second cage – front side of seat tube
  • Third cage – underside of down tube

If you need to relocate a bottle cage, please contact us before placing your order.

[/one_half_last]

[one_third padding=”10px 10px 10px 10px”]

Standard Frame Colours
£FOC

Standard frame colours are included in the price of a frame. Please refer to the Frame Colour Chart. Please note that the clearcoat (raw) frame finish is no longer available, as of December 1st 2018.

More Information

[/one_third]

[one_third padding=”10px 10px 10px 10px”]

Special Frame Colours
£60+

Special frame colours may incur a surcharge above the £60 included, due to multi-coats and powder costs; this can be up to another £60 (£120 total). We’ll inform before commencing work on your order if there is any additional charge to be paid.

More Information

[/one_third]

[one_third_last padding=”10px 10px 10px 10px”]

Custom Decal Colours
£30

Custom decal orders will receive a spare set of decals. Please refer to the Custom Decal Colour Chart.

More Information

[/one_third_last]

  • 44mm head tube (requires external lower headset cup) More Information
  • 31.6mm seat tube (34.9mm clamp)
  • 157 x 12mm dropouts
  • 160mm post rear brake mount (Max 205mm)
  • 83mm threaded (BSA) BB
  • Max. rear tyre size: 2.5″
  • ISCG05 chain device mount
  • Approx. 2.8kg (Size M, all axles, fasteners etc)
  • 26″ max. chain ring: 38t
  • 650B/27.5″ max. chain ring: 36t

The following size recommendations are a guideline only- contact us and we’ll be more than happy to discuss your needs!

Frame SizeMin. Rider HeightMax. Rider Height
Custom-156cm (5' 1.5")
XX Small152cm (5' 0")162cm (5' 4")
Extra Small158cm (5' 2")168cm (5' 6")
Small164cm (5' 4.5")174cm (5' 8.5")
Medium170cm (5' 7")180cm (5' 11")
Large176cm (5' 9.5")186cm (6' 1")
Extra Large182cm (5' 11.5")192cm (6' 3.5")
XX Large188cm (6' 2")198cm (6' 6")
Custom194cm (6' 4.5")-

Estimated lead time:

HARDTAIL2 Months

Check our current build queue

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.